Automobile frame load turning device is a device used to turn over automobile vehicles or frames. It is usually used in automobile manufacturing factories, automobile repair shops and other places. It can turn the car vehicle or frame upside down or flipped over for repair, maintenance, painting and other operations. Therefore, it is necessary to strictly follow the safety operating procedures during use to ensure the safety of personnel and equipment.
一. Preparation before operation
1. Before operating the automatic frame load turning device, sufficient preparations must be made. First, check whether the load turning device is intact and confirm whether all components, bolts, nuts, etc. are tightened reliably. At the same time, check whether the power cord and plug are intact to avoid safety accidents caused by power problems.
2. Secondly, confirm whether the area around the load turning device is clean and free of obstacles, and keep the operating space clear. During the operation, avoid having idle personnel enter the operation area to avoid accidents.
3. Finally, operators should wear protective equipment, such as safety helmets, work clothes, gloves, etc., to ensure that they will not be injured by splashing objects or accidental contact during operation.
二. Operation steps
1. Place the frame to be turned over smoothly on the platform of the load turning device, ensuring that the frame and the platform fit closely to prevent sliding or shaking during the flipping process.
2. According to the size and weight of the vehicle frame, adjust the support arms and brackets of the load turning device to ensure that they can firmly support the vehicle frame. At the same time, check whether the locking device of the load turning device is firmly locked to prevent accidental unlocking during the turning process.
3. Turn on the power of the load turning device and start the control system. During operation, you should always pay attention to the indicator lights and alarm messages on the control panel to ensure that the equipment is in normal working condition.
4. Use the button or handle on the control panel to control the movable arm or lifting platform of the load turning device to perform lifting and turning movements. During operation, you should maintain a smooth and slow speed, and avoid sudden lifts, drops, or sudden flips to avoid damage to the frame or safety accidents.
5. When the frame is flipped to the required angle, the flipping action should be stopped in time, and the frame should be fixed on the load turning device through the locking device. At this time, the operator should check whether the frame is stable and without shaking, and only proceed to the next operation after ensuring safety.
6. During the process of disassembling or repairing the frame, you should always pay attention to changes in the surrounding environment to ensure the safety of the operating area. At the same time, avoid using sharp tools or heavy objects to hit the load turning device or the frame to avoid damage to them.
7. After completing the operation, the frame should be returned to the horizontal position smoothly, and then the power of the load turning device should be turned off. Before turning off the power, make sure that all components are in place and the locking device is locked.
三. Precautions
1. During operation, you should always pay attention to the operating status of the load turning device and the changes in the indicator light. If an abnormality or alarm message is found, the operation should be stopped immediately and the cause should be checked. The fault can be eliminated before continuing the operation.
2. It is strictly prohibited to overload the load turning device to avoid damage to the device or safety accidents. During operation, appropriate support arms and brackets should be selected according to the size and weight of the frame, and ensure that they can firmly support the frame.
3. The operator should be familiar with the structure, performance and usage of the load turning device, and operate according to the prescribed steps. Untrained and authorized personnel are not allowed to operate the load turning device.
4. During the operation, the operating area should be kept clean and orderly to prevent debris or tools from falling into the load turning device and causing damage or malfunction.
5. Perform regular maintenance and upkeep on the load turning device, check the wear and looseness of each component, and promptly replace damaged components or tighten loose bolts. At the same time, lubricate and clean the load turning device to maintain its good working condition.